• Форматирование внутренних и внешних жестких дисков.
• Перемещение, копирование, создание, удаление, расширение и сокращение разделов на жестком диске.
• Клонирование жестких дисков, чтобы создать полную резервную копию.
• Проверка жестких дисков и их диагностика.
• Проверка памяти на наличие поврежденных секторов.
• Benchmark вашего компьютер для оценки его уровня работы.
• Удаление всех данных на жестком диске, без возможности их восстановления.
• Дает доступ к жесткому диску при не загрузающихся системах, позволяет спасать важные данные.
• Загружается с CD/USB в память, далее может работать без CD/USB.
• Поддерживает сетевые подключения.

This version of Parted Magic adds Wine, Gnome Disk Utility, DOSBox, and a new method of booting via PXE. We have also reverted back to the 2014 desktop wallpaper and GRUB screen as seen on the screen shots page.
Desktop is now XFCE and you can configure the crap of it now with GUIs and use the save session.
The NVIDIA drivers are used by default. This was a big gain moving to 64bit.
Lots of program requests that were not possible or problematic because of the 32bit system are now included. Libre Office, Wireshark, Keepassxc, VLC, etc…
This should put a smile on a lot of faces… International language support and man pages have returned. All languages supported by Linux should be available. Not a cherry picking of a few European countries. Ibus is also included. You’ll see the new entry in the boot menu to get this going.
The downside… The iso is now 1.5GB. I found some old laptops and tested the bigger Parted Magic. The one with 2GB of RAM worked just fine in Live Mode. Another one with 4GB ran just fine from RAM. Even the cheapest computers made in the last 10 years can still run this.
I’m sure I made a few people mad doing this, but I also made even more happy. As always, I hope version is better than the last.

Partition programs
• cfdisk - curses-based disk partition table manipulator
• fdisk - partition table manipulator
• fixparts - designed to correct common problems with computer partition tables
• gdisk - text-mode partitioning tool that works on GPT disks
• gpart - guess PC-type hard disk partitions
• GParted - partition editor that uses libparted
• parted - partition manipulation program
• sfdisk - partition table manipulator

File System Programs
• btrfs - btrfs is a new copy on write file system for Linux
• Bonnie + + - benchmark suite aimed at performing a number of simple tests
• curlftpfs - file system for accessing FTP hosts based on FUSE and libcurl
• dbench - file system benchmark programs
• diskdev_cmds - OSX-ported, HFS + programs supplying mkfs and fsck
• dosfstools - programs to create and check MS-DOS FAT file systems
• e2fsprogs - ext2 file system programs and libraries
• EncFS - provides an encrypted file system in user space
• fsarchiver - save contents of a file system to a compressed archive file
• FUSE - file system in userspace
• hfsplus - set of tools to access HFS + file systems
• IOzone - file system benchmark tool
• ntfs-3g/ntfsprogs - third generation NTFS driver and tools for doing neat things with NTFS
• ObexFS - FUSE based filesystem using ObexFTP
• reiserfsprogs - user-level tools for ReiserFS file systems
• sshfs - file system client based on SSH
• vmfs-tools - access VMFS through standard Linux VFS via FUSE
• xfsprogs - programs for managing XFS file systems
• zfs-fuse - a port of the ZFS file system from Sun

Booting Loader Programs
• grub - GRand Unified Bootloader
• HDT (Hardware Detection Tool) - Syslinux com32 hardware analyzer module
• install-mbr - installs and configures a Master Boot Record manager
• lilo - LInux LOader
• Memtest86 + - advanced memory diagnostic tool
• ms-sys - used to create Microsoft-compatible boot records
• syslinux - bootloaders for FAT12/16/32, bootable "El Torito" (iso9660), ext2/3/4 and brtfs file systems

X Programs
• Audacious - Audacious is an open source audio player
• Asunder - Asunder is a graphical Audio CD ripper and encoder
• arandr - designed to provide a simple visual front end for XRandR
• Blueman Device Manager - Blueman is a GTK + Bluetooth Manager
• ClamTk Virus Scanner - A GUI front-end for ClamAV
• Conky - lightweight system monitor
• CUPS - CUPS is the standards-based, open source printing system
• ddrescue-gui - A python script to make it easier to use ddrescue
• Evince Document Viewer - Evince is a document viewer for multiple document formats
• feh - an X11 image viewer aimed mostly at console users
• File Roller - archive manager
• Firefox - open source web browser
• galculator - GTK + scientific calculator
• GEncFS - GUI to EncFS, for encrypted directory mounting
• gtkdialog - small utility for fast and easy GUI building
• gtk-lshw - GTK + front-end for lshw
• GSmartControl - HDD health inspection tool (GUI for smartctl)
• GSSHFS - GUI to SSHFS, for distant directory over SSH mounting
• hardinfo - system profiler and benchmark
• ISO Master - GUI CD image editor
• Leafpad - GTK + based simple text editor
• lilosetup - a GUI utility to configure LILO bootloader
• Mirage Image Viewer - Mirage is a fast and simple GTK + image viewer
• netwag - a graphical front-end to netwox
• NetworkManager - Great Networking powered by DBUS
• Parcellite - Parcellite is a lightweight GTK + clipboard manager
• pyneighborhood - an OpenSource GTK + based SMB / CIFS Browsing utility
• ROX-Filer - a simple and easy to use graphical file manager for X11
• ROXTerm - ROXTerm is a terminal emulator intended to provide similar features to gnome-terminal, based on the same VTE library
• SciTE - A free source code editor for Win32 and X
• spacefm - a file manager with built-in VFS, udev-based device manager, customizable menu system, and bash integration
• systester - Test your system's stability and performance by calculating millions of digits of Pi
• TigerVNC Viewer - a high-performance, platform-neutral implementation of VNC
• TrueCrypt - software system for on-the-fly-encrypted volumes
• UNetbootin - create bootable, Live USB drives for Linux distros without burning a CD
• WICD - A network connection manager that aims to simplify wired and wireless networking in Linux
• XChat - IRC chat program
• xclamscan - GUI for the ClamAV anti-virus
• Xdialog - designed to be a drop in replacement for the "dialog" or "cdialog" programs
• xfburn - Xfburn is a simple CD / DVD burning tool based on libburnia libraries
• Yad - (yet another dialog) is a fork of Zenity with many improvements
• Zenity - allows you to display GTK dialog boxes in commandline and shell scripts

Console Programs
• AlsaMixer - soundcard mixer for ALSA soundcard driver, with ncurses interface
• arpwatch - a tool for monitoring Address Resolution Protocol traffic on a computer network
• bar - a simple tool to copy a stream of data and print a display for the user
• BlueZ - official Linux Bluetooth protocol stack
• bzip2recover - recover data from damaged bz2 files
• cdrtools - allows recording to CD / DVD / BluRay media
• chntpw - utility to (re) set passwords of local accounts on Windows systems
• ClamAV - open source (GPL) anti-virus toolkit for UNIX
• Clonezilla - OpenSource clone system
• cmospwd - decrypts passwords stored in CMOS used to access BIOS setup
• consoleKit - ConsoleKit is a framework for defining and tracking users, login sessions, and seats
• cURL - tool for transferring files with URL syntax
• dcfldd - enhanced version of GNU dd
• dc3dd - patched version of GNU dd
• GNU dd - convert and copy a file
• ddrescue - does not abort on errors on the input file
• device-mapper - kernel component that supports LVM
• di (Disk Information Utility) - disk information programs
• diff - compares two files, showing differences line by line
• disktype - detect content format of disk or disk image
• dislocker - designed to read BitLocker encrypted partitions under Linux and Mac OSX systems
• dmidecode - reports information about your system's hardware
• dmraid - discover and activate software (ATA) RAID
• DRBL - Diskless Remote Boot in Linux
• dvd + rw-tools - makes it possible to burn DVD images
• ELinks - text mode web browser
• ethtool - standard Linux utility for controlling network drivers and hardware
• ext3grep - recover deleted files from an ext3 or ext4 file systems
• extundelete - tool to help recover deleted files on ext3 file systems
• file - determine file type
• flashrom - identify, read, write, verify, erase flash chips
• gptsync - GPT partition table to MBR partition table synchronisation
• hdparm - get / set ATA / SATA drive parameters
• hexedit - view and edit files in hexadecimal
• hfsprescue - scans a damaged image file or partition that is formatted with HFS +
• iptables - administration tool for IPv4 packet filtering and NAT
• lftp - command-line file transfer program
• lm-sensors - Linux hardware monitoring
• lshw - Hardware Lister
• lsof - (LiSt Open Files) displays information about files open to processes
• lspci - lists PCI buses and devices in the system
• lsscsi - lists information about SCSI devices
• lsusb - lists USB devices
• lzip - gzip-like command line tool which uses LZMA compression
• md5deep - a set of programs to compute MD5, SHA-1, SHA-256, Tiger, or Whirlpool message digests on an arbitrary number of files
• mdadm - manage MD devices, aka Linux Software Raid
• Midnight Commander - file manager
• modem-manager - D-Bus service for managing modems
• multipath-tools - used to drive the Device Mapper multipathing driver
• nano - editor aimed to replace Pico
• nbd - network block device, client and server.
• nmap - programs for network discovery and security auditing
• ntp - Network Time Protocol
• Nwipe - run the DBAN dwipe command outside of DBAN
• Open-iSCSI - Open-iSCSI project is a high performance, transport independent, multi-platform implementation of RFC3720
• openSSH - encrypt sessions using the SSH protocol
• openSSL - open source implementation of the SSL and TLS protocols
• partclone - a project similar to the well-known backup utility
• partclone-utils - partclone-utils contains a utility for use with partclone generated images
• partimage - utility which saves partitions to an image file
• perl - a highly capable, feature-rich programming language
• PhotoRec - digital photo recovery
• pigz - parallel implementation of gzip that exploits multiple processors & cores
• plzip - parallel lossless data compressor based on the LZMA algorithm
• polkit - a toolkit for handling the policy that allows unprivileged processes to speak to privileged processes
• pv (pipe viewer) - monitors the progress of data through a pipeline
• pxz - a compression utility that runs LZMA compression of different parts of an input file on multiple processors simultaneously
• rdiff-backup - rdiff-backup backs up one directory to another, possibly over a network
• reglookup - direct analysis of Windows NT-based registry files
• RP-PPPoE - PPPoE client for Linux to connect to PPPoE service providers
• rsync - fast incremental file transfer
• rTorrent - text-based ncurses BitTorrent client
• safecopy - data recovery tool
• samba - the standard Windows interoperability suite of programs for Linux and Unix
• Scrounge NTFS - data recovery program for NTFS
• sdparm - outputs and modifies SCSI device parameters
• shorewall - a gateway / firewall configuration tool for GNU / Linux
• shred - securely delete a file
• smartctl - control and monitor utility for SMART disks
• stress - simple workload generator
• sudo - execute a command as another user
• TestDisk - partition scanner and disk recovery tool
• udevil - a program that mounts and unmounts devices without a password, shows device info, and monitors device changes
• udisks - a daemon that serves as an interface to system block devices, implemented via D-Bus
• UDPcast - transfer tool that can multicast data on a LAN
• unarj - program used to uncompress. arj format archives
• wpa_supplicant - implementation of an IEEE 802.11i supplicant
• wipe - secure, file wiping utility
• zenmap - the official Nmap Security Scanner GUI
• zerofree - Zerofree finds the unallocated, non-zeroed blocks in an ext2 or ext3 file-system and fills

• Эта версия Parted Magic обновляет Linux 5.15.2, NVIDIA 495.44 и добавляет lzop-1.04.

• Ядро 5.15 теперь полностью поддерживает NTFS без драйвера-предохранителя ntfs-3g.
• Мы придерживаемся ntfs-3g по умолчанию, пока не будут лучше поддерживаться инструменты пользовательского пространства, такие как udisks.
• Вы можете явно смонтировать тома NTFS из командной строки.

Файл: Parted_Magic_2021.11.17_(x64).iso
CRC-32: 57f94efd
MD5: 9b22c1b86e2484753caa800d4d9e4279
SHA-1: 5dea1bbb24f90c04980d579351f3a5af55a31702
SHA-256: fac0900d9f02bf48cbbfbace8f6ab99ceb8aed2d871d1d762222247fe84d532c